You might be curious why we want to look at the best traceroute alternatives in 2021. You might not realize it, but a traceroute alternative like, for example, Solarwinds Engineer’s Toolset, offers new features that enhance your troubleshooting capabilities.
Traceroute is one of the most powerful and often-overlooked tool in a network administrator’s arsenal. This command will show you where the problem is on your network – anywhere from LAN to WAN (public Internet).
Traceroute is useful for troubleshooting network issues and for checking the quality of a connection over time. It displays how long it takes to make a change from one device to another, showing if there is a problem in the trip.
You can use a tool like Traceroute or SolarWinds to determine exactly how your network is performing. We have rounded up our favorite tools for 2021 and explained a little about each one. You will have a clear picture of each app by the end of our comparison review. Here is a list below of all the tools we will be looking at today.
If you are looking for replacements for your traceroute network troubleshooting tool in 2021, take a look at the following alternatives.
What is traceroute?
Traceroute is a computer program that you can use to find out what routers your message travels through to reach its destination. It’s available in Unix and Mac operating systems, as well as Windows if you download it separately from Microsoft.
Traceroute functions by sending packets of data that are returned with a list of the hops and IP addresses. The time it takes for your packet to make its journey is also shown, which can be helpful in determining what type of connectivity issues you may have.
Traceroute can help you troubleshoot your network pathways and identify any issues. Traceroute works by identifying the number of hops between two points on a given pathway, as well as how much latency is in each hop. It will also tell you if there are any potential packet losses along that specific path for further investigation to find out what might be causing it.
Why use a tool like traceroute?
Traceroute, or the Tracrt utility was designed to enable administrators to use a number of control nets in tracing the path and speed of a packet from their own computer through the internet. What also makes this command useful is that it can be used even when Wi-Fi isn’t available so long as you have your cable plugged into your router:
- Traces the route of your data and can also map out your network environment
- See the total number of hops that a data packet makes on its journey towards a destination target
- Find breaks in the network path or find out if a device is either offline or dropping data packets
- It’s a free tool that comes with most systems as part of the operating system
Measure the latency between hops across each device so that you can see speed, latency and jitter stats. Traceroute empowers your technical staff to make good calls as they relate to network latency and traffic flows.
How does traceroute do all of this?
When you run the traceroute command it sends out multiple UDP packets to the destination host that you are targeting. When the target device is reached then an echo request is bounced back to the original computer that initiated the request which indicates a successful hop has been completed.
Network latency with traceroute shows what the round-trip time (RTT) is on your network, or over the internet. This tells us the time taken for the packets to reach each hopping point.
This whole process is repeats with each hop and gives us the details about each device and how long it took to get there right up to the point that it hits the target host that we wanted to reach.
The end result is that the round trip time is noted, and any dropped packets will be very obvious. Problems are identified and can then be rectified if they exist.
Why use traceroute alternatives then?
The main reason why you would want to use a commercial product instead of traceroute is that you may want to scale up your traceroute usage.
That is to say that you don’t want to repeat the same command over and over again as it is a waste of time and becomes a real pain.
Graphical interfaces are also more user friendly so you can empower less technical staff on your team to take proactive steps towards diagnosing network errors.
See our table below to help you select the traceroute alternative that suits your needs and budget, enjoy!
Best Traceroute Alternatives 2021
Troubleshooting networks can be difficult, especially when you have to integrate multiple tools. There are more efficient and streamlined solutions for network monitoring that allow IT professionals a better experience in troubleshooting their systems.
Use a traceroute alternative to get all the benefits of standard traceroute and more. For example, in enterprise settings where IT professionals have many tools at their disposal for troubleshooting, they may be using one tool when there is an integrated solution that would provide them with faster results.
SolarWinds Network Performance Monitor
You’ll be amazed at all the things you can do with SolarWinds. It is not just a simple network tool but the features offered are also groundbreaking. It also provides for monitoring connections between your remote sites and internal networks. The goal of basic traceroute is to determine a way to monitor the path an item takes in order detect potentially ineffective channels, and SolarWinds proves that developers understand this importance.
It gives you an analytical visual platform that allows you to see and understand the hop by hop analysis of any infrastructure such as on prem, hybrid or cloud networks. Netpath’s network intelligence driven technologies provide latency information about every node being actively monitored so when degradation starts affecting various services on your internet connection there are no surprises; it’ll all be right up front with detailed reports showing what went wrong at each step along the path from point A (your computer) to B (the remote server).
The app has a powerful tool for mapping out your network and tracking usage. You can use this to find problems, monitor traffic levels on individual nodes in your system, identify weak points that need upgrading or optimization work done upon them–or see the impact of new changes you may want to make before they’re put into effect so as not to cause disruptions with no warning! An end result is an improvement across all aspects of service offered by the application.
SolarWinds is a highly versatile network tool that does a lot more than traceroute.
- SolarWinds Network Performance Monitor – This tool is used to monitor the performance on your network by collecting data from all devices in real-time with an easy interface for viewing graphs over time periods as well!
- Network Configuration Manager – A feature that allows you to configure and manage your network devices in one place.
- Network Security Manager – This tool will allow for the management of all aspects related security on a device or group, including vulnerability scanning! It also has an interface that is easy-to *use with many different views available at any time so it’s not overwhelming when looking at the different aspects of security.
SolarWinds Engineer’s Toolset
This software gives real time alerts on changes in status of any monitored resource. Network guru also provides configuration and log management as well as monitoring IP addresses or DHCP scopes.
If you’re looking to identify free and in-use IP addresses, Engineer’s Toolset Ping Sweep can scan your network range for active devices. The ping sweep sends multiple packets simultaneously on all networks belonging to the broadcast address of a given subnet or Classless Interdomain Routing (CIDR) block. Results are exported as CSV/TXT/XLS files or an HTML page depending on preference.
SolarWinds Engineer’s Toolset Network MAC Scanner provides automated scanning and mapping of IP addresses. You can search subnets, construct tables relating these from data to other details like the manufacturer address or DNS info that you want included in your report. Customize with easy configuration options for a more tailored solution!
This will allow you to configure any router, switch, hub, server or other device that is supported by this protocol. The tool comes with over 1 million precompiled OIDs from hundreds of standard and vendor-specific MIBs so it’ll support both proprietary and standardized equipment; just make sure your network has a healthy mix!
A lot of time can be spent searching through MIBs and OIDs to find the one you’re looking for. Engineer’s Toolset has a way of making this process easier by listing all supported MIBs and corresponding OID information, so that it is faster to get what you need.
Why is SolarWinds Engineer’s Toolset useful in the IT world?
The Engineer’s Toolset is a great tool for any network engineer. It provides an easy way to find the information you need, and it can be used on both Windows or Linux platforms with no extra cost!
The application might not be as sophisticated as some other SolarWinds products, but it gets straight to the point with quick results at no cost!
SolarWinds TraceRouteNG is a powerful network diagnostic tool. Using the NetFlow feature in SolarWinds, you can get an overview of your network and track down where your issues are coming from. The program will let you properly count and identify hops packets made by other packets, providing other important stats like round trip time or percentage of packets received.
The amazing SolarWinds traceroute NG is one of the fastest you can find, taking as few as 2 seconds to start responding once a request has been made. The app’s functionality extends beyond just reporting hostnames and IP addresses. SolarWinds displays data latency as it travels between nodes. This app sets up two different networks and lets you know if your network changes.
Path Analyzer Pro
With this tool you can quickly and easily find out the current route that your computer or device’s internet connection has taken to get where it currently is.
You can also identify any choke points (such as firewalls) in its way of connecting with a website or service provider. After this you can then take steps to bypass them without hindering performance significantly by using path discovery techniques such as multi-metric hops.
It also offers a graphical interface complete with reporting features so users are able to detect potential issues more efficiently than ever before! Apple users rejoice! Now you can run network diagnostic software on your MacOS.
So long as the technician is running OSX, they will be able to make use of this powerful tool without issue. That’s not all though; Windows based machines are also compatible with Novell Remote Manager and offer a seamless experience from there too.
You can find out more about your network and the connections it is making, even without a sniffer. NetFlow Analyzer allows you to look at information such as email address associations, blocked IP addresses or if there are IPv6 related problems with packets from time-to-time.
It’s pretty eye opening when you see all of this data in one place and understand what exactly each problem represents for those who would be unable to read raw packet traces due to various technical skillsets required by different networks!
Pricing: Click here for the latest pricing information.
VisualRoute can be used to efficiently diagnose network outages by reporting back accurate physical geographical details. This includes the location of servers, routers and other devices so that you may map out an outage according to their area it occurs in. It also provides WHOIS lookup tools for determining who owns a specific IP address registration!
OmniPath has many features that are beneficial to IT professionals. For example, it offers a unique system called NetVu which provides you with multiple path and route technologies so that if one connection is unavailable or broken there will always be other alternatives for your data networks.
Visualware offers a sophisticated server-based testing system that will allow you to run tests for your internet connection. They have two servers based in Washington and London, which are the perfect geolocation if you’re trying to pinpoint network providers such as ISPs or third party providers. With their reporting service, this allows you continuous access when it comes to identifying trends through long term data collection on what is happening with your Internet speed!
Pricing: Click here for the latest pricing information.
Open Visual Traceroute
This project also offers a built-in packet sniffer for any curious minds out there who want answers without having to do all the legwork themselves!
The link checker is a useful tool for detecting and diagnosing any issues you may have with your internet connection. You are able to investigate the packets of data being sent or received, giving greater insight into what type of traffic your network has been experiencing lately.
One cool feature found on this app that we haven’t yet discussed is the Whois option which will tell you who an IP address or DNS name belongs to! This can be really helpful in determining where most of our problems lie as it gives us a visual representation of regions and areas from around the world so that we know exactly how well everyone’s connections are performing.
Pricing: Free! Click here for more information.
Conclusion: Start Using a Traceroute Alternative
There are many options for getting a trace route done quickly and easily. Regardless of what your budget is, there will be free tools available to you but some solutions might cost money up front or require premium subscriptions in order to work well. The decision that you make on which tool best fits your needs will depend on several factors such as the complexity of the network being traced, whether it’s local or international traffic (or both), how often traces need to be completed when they get disrupted, etcetera .
What is the best network troubleshooting tool? You might think it’s a big decision, but you would be wrong. The answer to this question doesn’t lie in your preferred method of networking or on how much money you have; instead, there are many different tools that can do just about anything anyone needs for their particular networks and configuration.
Everyone will want something slightly different from any given application because everyone has differing requirements as far as what they need out of these programs: some may want more detailed visual maps while others prefer running traces routes through specific websites around town-the options really are endless with all the various software available today!
The traceroute protocol has been around for a long time, and while it is highly useful, there are newer tools that offer more features. I recommend SolarWinds Network Performance Monitor because of all the network troubleshooting capabilities in one package.
If you’re looking to save some money on your purchase though, Traceroute NG offers several basic but straightforward tools without any additional bells or whistles at no cost whatsoever!
In this guide we hope to help with some insights into what’s available in 2021 when considering a tracing program for yourself or company.
What can I use instead of Traceroute?
Here's the top Traceroute Alternatives of 2021: SolarWinds TraceRouteNG, SolarWinds Network Performance Monitor, SolarWinds Engineer’s Toolset, Open Visual Traceroute, Path Analyzer Pro, Visual Traceroute Tool.
What two tools are similar to Traceroute?
SolarWinds TraceRouteNG and SolarWinds Network Performance Monitor both offer similar functionality to Traceroute.
What is the difference between Traceroute and Tracepath?
Tracepath and traceroute are both network mapping commands. Traceroute requires a superuser credential on a Linux computer, whereas tracepath can be run without it. Users with access to the command line can run both diagnostic tools on a Windows PC. Other than that they are quite similar.