Do you need an ATT WiFi Booster? (Let’s Find out!)

ByGraeme WiFi

ATT WiFi Booster units are great. We are often asked how to boost WiFi with ATT WiFi boosters to help users get a better internet experience. We have a few WiFi boosters that we can recommend via Amazon Affiliate links which you will find further on in the article.

ATT WiFi boosters: why do people love them? ATT users and anyone else who wants to expand their WiFi coverage without spending too much money are attracted to these units due to their affordability and reliability.

Table of Contents

ATT WiFi Booster

How can I boost my ATT WiFi signal?

You may notice that the ATT router does not always provide a fast and reliable Internet connection when you have an ADSL, fibre or cable broadband connection.

There is a reason for this, and it is that your network does not have a WiFi Booster, which is a small device connected to your router that you can use to extend the range of your Internet connection.

ATT WiFi networks can be enhanced by adding more access points, or by using WiFi boosters. It will be necessary for you to know the exact location of your ATT WiFi booster unit to accomplish this.

Although ATT is compatible with many WiFi boosters, there are only a few that are good enough for decent internet performance. You can find our recommendation in the following table.

Do ATT WiFi boosters make your WiFi better?

So, what exactly is a WiFi booster? A WiFi signal booster enhances the signal quality of your WiFi network. It is possible, for instance, to boost a weak WiFi signal into a stronger signal using a WiFi booster. This improves the performance of your WiFi network and helps you establish a better connection. Amazon.com and eBay are two places where you can buy ATT WiFi boosters. 

When buying a WiFi booster, the most important thing to consider is whether it will work with your ATT router. WiFi boosters connect to your router via the same WiFi network as your router, which is why they work. A WiFi booster will be necessary if your router has a weak signal.

In summary, to improve your WiFi experience, you will need a WiFi booster that works with your router. You can’t just pick up any WiFi booster that looks like it might work, since you have to make sure it’s compatible with your ATT router. 

How can I increase my WiFi signal strength?

You can improve your internet performance by boosting your WiFi signal, as mentioned above. With a WiFi booster, you can increase the signal strength of your WiFi network. In addition to boosting your WiFi signal, the best WiFi boosters for ATT will boost other WiFi signals, so you’ll need to ensure that no other devices are on the same WiFi network.

Before purchasing a WiFi booster, be sure your router can handle it. Due to the nature of WiFi boosters, they are designed to boost your Internet connection, not any other devices your router is connected to. The best WiFi boosters have a maximum range of about 60 feet or less.

Why is ATT WiFi so bad?

It is hard to single out ATT as having particularly bad WiFi, and there are various reasons for this. The first reason is that broadband routers generally come with inadequate WiFi capabilities in order to decrease costs, as well as to accommodate audiences with lower expectations from hardware that may have been provided for free as part of an internet package. 

Additionally, most consumers do not have access to business grade WiFi routers in their homes. Due to this, it is unlikely that most people will be able to choose what they want from their WiFi network. ISPs will determine what equipment is available to consumers, and how they choose to implement their network infrastructure is up to them.

Although ATT WiFi is generally reliable, there are some issues that can affect your experience.  If you have a large home or if you have more demanding users who need better WiFi, then the easiest and cheapest solution is to use a WiFi booster. However, there are also many great mesh WiFi systems available that can be useful if your home is larger or if you have more demanding users.

How to Boost Your WiFi Signal in 3 Simple Steps

When you are near or far from your WiFi router, the key factor is the signal strength.

When you get farther away from your router, the signal strength gets worse and weaker. Here are some possible reasons why this might be happening.

When you move to another room in your home and your WiFi stops working, it is due to interference and proximity.

Your overall WiFi experience can be affected by several key factors that an ATT WiFi booste r could help you with. The issues we discuss below are listed below.

Factors That Affect Your WiFi Signal Strength

1. Distance from your router 

The first thing to do is check your WiFi signal by opening up your WiFi network management software (e.g. Netgear Genie) and check your connection quality. If you see a message about a weak signal, this is usually due to a lack of signal strength.

You should also be able to see what device is closest to your router (for example, your laptop, smart phone, or tablet), and you can use this to help identify the source of your issue.

If you are unable to connect to the WiFi, or get a low quality connection, then you may need to move closer to the router or add a WiFi booster to help boost your WiFi signal. If this is the case, we would recommend adding a WiFi booster if you have the option.

2. Your Router’s Settings 

There are three main settings that will affect your WiFi signal: 

Range – this is the maximum distance that your WiFi signal can travel before it drops below an acceptable level. This is measured in dB. The higher the dB, the further the signal can travel. 

A good benchmark is to look at other WiFi signals in your area and try to match their range. We have a full guide on how to increase the range of your WiFi for Virgin Media here, but in short, you will want to make sure that your router has the best possible settings for the area that you live in.

  • Security – this is how secure you router is, and should be set to the highest level that you are comfortable with. 
  • Protocol – this is the type of wireless technology that your router uses. Most modern routers support both
  • 11a/b/g/n and newer versions (11ac) that can provide faster speeds. You should ensure that you have the latest version of your router.
  • Interference – This is where interference comes into play. The more devices that are using the same WiFi channel, the less bandwidth you will get. This is usually caused by either having a lot of wireless devices in your home (e.g. TV’s, tablets, smart phones, etc.) or having a laptop on your desk that is streaming video. If your WiFi works fine when there is only one device in the house, then it’s most likely to be an interference issue. If your WiFi signal is strong when there is only one device connected, then it’s likely due to interference from one of your other devices. You will need to troubleshoot your network by gradually introducing WiFi devices one at a time until the problem reappears.
  • Wireless Security and WPA2-PSK Mode – this is where we come back to the security settings of your router. Most routers are set to WPA2-PSK by default. This is the best option, as it uses encryption to secure your connection. However, WPA2-PSK is not compatible with all devices, and the newer versions of WPA3-TKIP.

Conclusion: Boost Your ATT WiFi signal

WiFi is a ubiquitous service that everyone needs to connect to the internet with modern wireless devices. We have looked at some of the basic factors that will affect the quality of your WiFi connection, but if you are still having problems with your ATT WiFi signal, then we have a few tips that you can try to boost your signal.

1. WiFi positioning 

2. Set your router to the highest range setting

3. Use WPA2-PSK for your security mode

4. Add a WiFi booster if you can

5. Remove other devices from your WiFi network

6. Use a different WiFi channel

7. Try a different router

8. If none of these work, there are other options that you can try to improve your WiFi experience.

We hope that this has been helpful, and that you can find the answer to your ATT WiFi booster issues.

Graeme is a CompTIA and Microsoft Certified IT professional with an interest in computers, cybersecurity, internet technologies, WiFi routers, and Internet Service Providers. He is highly knowledgeable and has over 20 years of experience working in the industry and has written for places such as CBT Nuggets, InfoSec, and Engineering.com.